Flashing Tasmota

• Flash replacement ESP8266 chip (ESP-12F) using Wishiot ESP8266 Burning Fixture Development Board and Tasmotizer

Desolder CB3S chip and swap

• Desolder CB3S chip and replace with ESP12F chip
• Add 10K resister between GPIO15 and GND

Configure Device

From Tasmota's Console, issue the following commands:

Module 54
Backlog SetOption97 1; TuyaMCU 11,1; TuyaMCU 21,2; SetOption20 1; SetOption54 1; DimmerRange 100,1000
Restart 1

For some reason, the DimmerRange needed to be set again.

DimmerRange 10,1000