Programming the Bell Remote to 

https://bellaliant.bell.ca/support/article/program-my-fibe-tv-slim-remote/870900000038512

• From the list below, indentify the 4-digit code for your TV brand. If your brand is not listed, try programming your remote with the brand-search method.

  TV brand	4-digit code
  Insignia	0010
  Vizio	0011
  RCA	0012
  Sanyo	0013
  Panasonic	0014
  Funai / Emerson	0015
  Sharp	0016
  LG	0017
  Toshiba	0018
  Sony	0019
  Samsung	0020
  Phillips	0021
  Fluid	0022

  
  

• Turn on your TV.
• Turn on your FibreOP TV receiver.
• Point your FibreOP TV Slim remote at your TV.
• To enjoy consistent volume, we suggest lowering the volume of your TV and increasing the receiver volume to 25 before programming your remote.
• Press and hold the OPTIONS button for 3 seconds until the green TV light blinks twice.

  

• Enter the 4-digit code from the table above using your remote’s number buttons. You must enter the code within 10 seconds.

  

• Press and hold the POWER button until the TV turns off. This could take up to 5 minutes. The green TV light will slowly blink as it cycles through all the TV manufacturer codes.

  

• Once your TV turns off, let go of the POWER button and press SELECT. The green TV light will blink twice to confirm it has been successfully programmed.

  

• If your TV does not turn off or the green TV light blinks 5 times, try programming your remote with the brand-search method.

  

Universal Remote Setup