I want to be able to leave the Jandy TruClear body connected over the winter and remove the insides to safeguard inside. So, I created a winter cap that goes on in the winter and a container to store the cell. The container can also be used to soak the cell in it's cleaning solution.
File | Link |
---|---|
Fusion 360 | |
STL | |
Filament | ABS |
This is a custom leaf filter for a 3x3 downspout.
File | Link |
---|---|
Fusion 360 | |
STL | downspout_filter v3.stl |
File | Link |
---|---|
Fusion 360 | |
STL |
File | Link |
---|---|
Fusion 360 | |
STL |
File | Link |
---|---|
GCode |
File | Link |
---|---|
Fusion 360 | |
STL |
Side Table Foot
File | Link |
---|---|
Fusion 360 | |
STL | |
GCode (4x) | |
Filament | PETG |
File | Link |
---|---|
Fusion 360 | |
STL |
File | Link |
---|---|
Fusion 360 | |
STL | Table Foot v1.stl |
File | Link |
---|---|
Fusion 360 | |
STL | |
Code | |
Filament | PLA |
File | Link |
---|---|
Fusion 360 | |
STL | |
Filament | TPU |
File | Link |
---|---|
Fusion 360 | |
STL | |
GCode | |
Filament | TPU |
File | Link |
---|---|
Fusion 360 | |
STL | |
Filament | PETG/PLA |
File | Link |
---|---|
Fusion 360 | |
STL | |
Filament | TPU |
Arm Rest
File | Link |
---|---|
Fusion 360 | |
STL | |
Filament | PETG |
Nut, Bolt and Washers
File | Link |
---|---|
Fusion 360 | |
STL | |
Filament | PETG |
File | Link |
---|---|
Fusion 360 | |
STL | |
Filament | PLA/PETG |
Notes | 33 mm diameter |
File | Link |
---|---|
Fusion 360 | |
STL | |
Filament | PLA/PETG |
Notes | 23.8 mm diameter |
https://www.printables.com/model/335290-cup-warmer-mat-for-rancilio-silvia-espresso-machin
https://www.printables.com/model/61524-rancilio-silvia-equipment-holder/files
I reworked this design to be be a bit stronger. See above.
File | Link |
---|---|
STL |
File | Link |
---|---|
STL |
https://www.printables.com/model/408195-bathtub-drain-filter
File | Link |
---|---|
STL |
File | Link |
---|---|
STL |
https://www.printables.com/model/439469-dewalt-battery-holder
File | Link |
---|---|
STL |
Model | URL |
---|---|
Lightning dirt remover | https://www.printables.com/model/413652-lightning-dirt-remover/files |
Lack Table Bracket | https://www.printables.com/model/46769-additional-lack-table-bracket |
Lack feet adjustable height | https://www.printables.com/model/164528-lack-feet-adjustable-height |
Prusa I3 Mk3 Heatbed Cable Cover Soldered | https://www.printables.com/model/1983-prusa-i3-mk3-heatbed-cable-cover-soldered |
Push Stick for table saw | https://www.printables.com/model/56897-push-stick-for-table-saw |
HexScraper - Printbed scraper | https://www.printables.com/model/122894-hexscraper-printbed-scraper |