Versions Compared

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

Table of Contents

Removing the Hub and Bearings



Outer Bearings

Specification Details
Make/ModelKoyo L44648
ID27 mm1.063" or  1-1/16"
OD45.5 mm~ 1.791" 
Width (Thickness)14.7 mm0.579" 
Hub Opening 50 mm2"

...

Specification Details
Make/ModelDexter 010-004-00
ID

OD


Parts

PartPictureDescriptionURL
Bel-Ray Waterproof Grease

Image Added

Bel-Ray Waterproof Grease is the legendary high-performance, multi-purpose grease. Superior water resistance, even in salt water, will ensure continued sealing and protection. Perfect for wheel bearings, headsets, shock linkages, swing arm pivots and other motorcycle, ATV, snowmobile and marine chassis lubrication points. Due to its aluminum complex formula, it won’t melt or run out. Enhanced mechanical stability and special anti-wear additives protect and lubricate bearings for improved performance.

NLGI Grade 2

https://www.amazon.ca/dp/B0045L75M6?psc=1&ref=ppx_yo2ov_dt_b_product_details
Trailer Hub Kit

Image Added

iBroPrat 2 Sets Trailer Hub Kit 5 Bolt 4.5, Trailer Axle Kit for 3500 lb 5 Lug Trailer Hub with Extra Dust Cap and Rubber Plug


For trailer idler hub 5 on 4-1/2" for 3,500 lbs trailer axle.

Fits 1-1/16'' to 1-3/8" Trailer Axles 3500lb #84 Spindle.

https://www.amazon.ca/dp/B0BJ8ZVVD1?psc=1&ref=ppx_yo2ov_dt_b_product_details


Packing the Bearings

I decided to buy a new hub kit since my old hub was kinda rusty and not as nice looking. The new hub kit with bearings was only $109 CA + Tax.


Start by packing grease into the inner and outer bearings


Install Inner Bearing

Install Bearing Seal

Grease spindle

Insert Hub on Spindle

Install Outer Bearing, Washer and Spindle Nut

Tighten and Loosen Nut and Install Cotter Pin

Add Grease

Install Dust CapImage Removed




References

ReferenceURL
How To Repack Trailer Wheel Bearingshttps://www.youtube.com/watch?v=mVtokwZuetI
TRAILER HUBS AND WHEEL BEARING REPLACEMENT GUIDEhttps://www.youtube.com/watch?v=YJNz5F8fRtA
The Boler Project - Ep 2 - How to Check the Wheel Bearingshttps://www.youtube.com/watch?v=ORrfjC-qFJY&t=6s
Changing the Bearings Procedurehttps://www.boler.ca/2018/04/17/wheel-bearings/
Bearing Buddy Installationhttps://www.youtube.com/watch?v=L8YLtX9rSE4