...
- Short when powered on. Trips breaker.
- Problem resides on the motor control board. MLH0910PC Johnson.
Testing MOSFET
A simple test to determine if the MOSFET has failed is to check for open circuit between Drain and Source.
Set multi-Meter to Diode Mode
...
Open Circuit
Motor Control Board
Pictures
Board Layout
Schematic
...
Part | Specification | Original Part# | Replacement Part# | Image |
---|---|---|---|---|
MOSFET | Power Mosfet | IRFP260N | IRFP260N | |
2x Capacitors | Aluminum Electrolytic Capacitors - Snap In 680uF 200 Volts 20% | LSG681M2D-2540 | LGR2D681MELA40 | |
Power Diode | 30A, 600V Ultra Fast Diode | F30U60ST | RURP3060 | |
TO-220 Insulation Kit | Insulation Kit required because the new diode does not have an insulated packaging. | - | TO-220 Insulation Kit |
|
Completed Work
TODO
...
Useful Information
Testing a MOSFET
A simple test to determine if the MOSFET has failed is to check for open circuit between Drain and Source.
Set multi-Meter to Diode Mode
Positive Lead | Negative Lead | Expectation |
---|---|---|
Drain | Source | Open Circuit |
Testing the Treadmill Motor
...