...

We moved around some circuits in the panel to ensure all critical circuits are on the same phase.  

Connecting to the Panel

To connect our inverter to the panel, we simply connected our inverter to a receptacle which was running on the desired phase (L2 in our case). Ideally, this receptacle should not be on a circuit containing a GFCI or arc fault breaker. It will still work but if the GFCI/Arc Fault trips, you won't be able to reset the circuit.

Steps to Follow

• turn off the input cuircuit on panel! (main power)
• turn off all circuits
• connect inverter to receptacle on desired phase. (Ideally a circuit not protected by a GFCI or arc fault breaker)
• power on inverter
• turn on critical circuits on panel.