...

• turn off the input cuircuit on panel! (main power)
• turn off all circuits
• ensure all 240v breakers are OFF (we can not turn these on)
• connect inverter to receptacle on desired phase. (Ideally a circuit not protected by a GFCI or arc fault breaker)
• power on inverter
• turn on critical circuits on panel.

Connecting to the Panel - Both Phases

To connect our inverter to both phases we will need to connect to two different receptacles on different phases. We will need to ensure all 240v breakers are turned off.

Connection Steps

• turn off the input cuircuit on panel! (main power)
• turn off all circuits
• ensure all 240v breakers are OFF (we can not turn these on)
• connect inverter to receptacle on each phase. (Ideally a circuit not protected by a GFCI or arc fault breaker)
• power on inverter
• turn on critical circuits on panel.

...