Spot Welder - Integrated battery
Description:
* Battery spot welder product description In the 18650 battery pack assembly process, the spot welder is an indispensable important tool, but the ordinary spot welder on the market is bulky and has a relatively high weight.
...
- Size: Approx. 150mm x 95mm x 50mm/5.9" x 3.74" x 1.97"
Spot Welder - XT60 Connection
12V Battery Spot Welder PCB Circuit Board DIY Spot Welding Needles for RC Car
Feature:
- High quality and professional, durable to use
- This circuit with 12V battery will become a storage spot welding machine for lithium battery, nickel-chromium battery and other nickel sheet welding; according to different configurations can be welded thickness of 0.1MM-0.15mm or so
- The button can switch modes. Each mode corresponds to different welding time. The LED corresponds to red / green / blue / white / yellow / pink /purple, 7 modes, the shortest red time and the largest purple welding time. Long press to set the waiting time, the default is 3 seconds; the maximum can be set to 10 seconds
Color | Welding Time |
---|---|
Red | 1 - shortest |
Green | 2 |
Blue | 3 |
White | 4 |
Yellow | 5 |
Pink | 6 |
Purple | 7 - longest |
Specification:
- Supply voltage: 12V-16.8V (capacity X rate = must be greater than 150A)
- Current requirements: 150A or more instantaneous output (such as car starter power supply, 3S RC high-power battery pack, 20A lead-acid battery with good performance above 20A)
- 7-16.8V power supply
- Support manual / auto mode
- Multiple gear selection
- Light instructions
- Support: Farad capacitor, Aircraft model high rate battery
- 2 Types: PCB Circuit Board, Spot Welding Needle (Optional)
Note:
- The 18650 battery cannot be used as a power supply. It must have a high rate RC battery or a car battery