Frame type: Folding
Drive motor: 2.5 continuous-duty horsepower
Speed range: 0.5 to 12 mph
Incline range: 0 to 12 percent (in 0.5 percent increments)
Running area: 20 by 55 inches
Cushioning: MaxComfort cushioning system
Display: Backlit LCD and 2 LED feedback windows
Programs: 9
Workouts: Manual, Weight Loss 1 and 2, Power Walk 1 and 2, Walk/Run 1 and 2, Incline, and Livestrong.com
Workout tracking: Livetrack Interactive technology
Quick speed keys: Yes
Quick incline keys: Yes
Heart rate: Contact grips
Built-in speakers: Yes
Personal fan: Yes, blower
Capacity: 325 pounds
Folded dimensions: 36 by 63 by 44 inches (W x H x D)
Unfolded dimensions: 36 by 60 by 70 inches (W x H x D)
Weight: 187 pounds
Warranties: Lifetime on frame and motor, 2 years on parts, 1 year on labor
About Livestrong Fitness
Manufactured by Johnson Health Tech, Livestrong Fitness equipment is a proud partner of the Lance Armstrong Foundation. Livestrong offers a complete line of home fitness equipment, including treadmills, elliptical trainers, and exercise bikes, as well as Livestrong by Matrix commercial fitness equipment. With Livestrong Fitness, you can find the perfect fitness solution for any budget, goal, or lifestyle.

Pictures

Wiring Diagram

Image RemovedImage Added

Part	Description	URL	Compatible Models
1000111476	Johnson Fitness 1000111476 Motor Control Board AFG HORIZON	https://treadmillfactory.ca/products/johnson-fitness-1000111476-motor-control-board-afg-livestrong-horizon https://www.fitnessrepairparts.com/cart/ViewItem/49014509	Horizon CT7.1
082406	Speed Sensor & Optical Disk This part contains the optical disc. If the optical disc is not necessary please order 080869 which contains the speed sensor without the optical disc.	See https://parts.johnsonfitness.com/htm0791-01-ls8-0t-tm641-tm652-canadian-2011
080869	Speed Sensor
JM01-013	Johnson Integrated Drive Motor 2.5 HP, 90 VDC, 3150 RPM, 20Amps

...

Number of LED Blinks	Status	Description	Possible Problem Component
1	Works normally	Works normally	-
2	Optical Encoder without feedback	The optical encoder is without feedback for 3 seconds during start procedure or 1 second during workout.	Poor contact or damage to the optical encoder ** Motor not running will trigger this code as well.
3	Overload	The motor current is over rated tor more than & seconds	Motor
4	Speed is too large	The motor power components are damaged or speed up too fast.	Motor ** Could result from blown Mosfet.
5	The safety key is off	The safety key is off.	Safety Key
6	The incline motor is stuck or has lost efficiency	There is no signal to the MCB when the incline motor is energized.	Incline Motor
7	Communication abnormal	No or abnormal communication between the console and MCB.	Console Cable, UCB, or MCB
8	Bad connection between the incline motor and the MCB	The incline motor cannot go back to absolute "O" degrees.	Incline Motor or MCB