...
| Detail | Specification | Image |
|---|---|---|
| Product Model | XD-RF-5V |
|
| Operating voltage | 5V | |
| Quiescent Current | 4 mA | |
| Receiving frequency | 433.92MHZ | |
| Receiver sensitivity | -105DB | |
| Pinout from left → right | VCC, DATA,DATA,GND |
Simular Product:
https://www.seeedstudio.com/433MHz-ASK-OOK-Super-heterodyne-Receiver-module-p-2205.html
| Image | |
|---|---|
|
|
Transmitter Specifications
| Detail | Specification | Image |
|---|---|---|
| Product Model | XD-FST |
|
| Launch distance | 20-200 meters (different voltage, different results) | |
| Operating voltage | 3.5-12V | |
| Operating mode | AM | |
| Transfer rate | 4KB / S | |
| Transmitting power | 10mW | |
| Transmitting frequency | 433M | |
| Pinout from left → right | DATA; VCC; GND |
...
| Reference | URL |
|---|---|
| Spec Sheet | http://www.mantech.co.za/Datasheets/Products/433Mhz_RF-TX&RX.pdf |
| How 433MHz RF Tx-Rx Modules Work & Interface with Arduino | https://lastminuteengineers.com/433mhz-rf-wireless-arduino-tutorial/ |
| Complete Guide for RF 433MHz Transmitter/Receiver Module With Arduino | https://randomnerdtutorials.com/rf-433mhz-transmitter-receiver-module-with-arduino/ |
| Using Inexpensive 433 MHz RF Modules with Arduino | https://www.youtube.com/watch?v=b5C9SPVlU4U |
| Radio Head Library | http://www.airspayce.com/mikem/arduino/RadioHead/ |
| RF Sniffer | https://www.electroschematics.com/13682/433mhz-rf-sniffer/ |
| RC Switch Library | https://github.com/sui77/rc-switch |
| Reverse Engineering RF Remote Control | https://www.instructables.com/id/Reverse-Engineer-RF-Remote-Controller-for-IoT/ |
| rtl_433 | https://github.com/merbanan/rtl_433 |
| USING AN RTL-SDR AND RTL_433 TO DECODE VARIOUS DEVICES | https://www.rtl-sdr.com/tag/433-mhz/ |