...
- Depressurize system by releasing air from top of filter.
- Remove pump drain plug and disconnect pump.
- Attach zip lock bag over wires and secure with an elastic.
- Drain cartridge filter and remove pleated filters.
- Clean filter parts and put in filter and re-seal.
- Plug pump output with #11 plug and force air through filter drain. This will force air through the return lines.
...
- Plug one return using plugs to force water out other line and then repeat with the other line.
- Remove drain plug from heater and force out water with air.
- Force Vacuum water from skimmer and force air through intake(skimmer) line and vacuum out remaining water.
- Add antifreeze to return lines and plugskimmer drain and attach "gizmo" and extra section of pool noodle.
- Add antifreeze to skimmer drain and attach "gizmo"return lines and plug.
- Plug Pump pump Input with #11 plug.
- Remove salt cell and install winter cap.
- Clean filters.
- Store pump, salt cell inside. Store filters inside garage attic.
- Install Cover
...