...
Pin | Description |
---|---|
RST | External Reset - Low=RESET, High=NORMAL |
ADC | Analog DIgital Converter - Max Voltage = 1V |
EN | Chip Enable - Low=DISABLED, High=NORMAL |
GPIO16 | GPIO16 |
GPIO14 | GPIO14, CLK(SPI) |
GPIO12 | GPIO12, MISO(SPI) |
GPIO13 | GPIO13, MOSI(SPI) |
VCC | 3.3V |
TX0/GPIO1 | TX0, GPIO1 |
RX0/GPIO3 | RX0, GPIO3 |
GPIO5 | GPIO5 |
GPIO4 | GPIO4 |
GPIO0 | GPIO0, HIGH on boot |
GPIO2 | GPIO2, HIGH on boot |
GPIO15 | GPIO15, LOW on boot |
GND | Ground |
...
CH_PD (or EN) Chip enable. Should be high for normal operation.
Wiring the ESP8266 Chip
Details
Spefication | |
---|---|
GPIO Output Current | 12 mA |
Dev Boards
Board | Info | Layout |
---|---|---|
ESP8266 Thing Dev | https://www.sparkfun.com/products/13711 PROS: External antenna connection. Serial Driver: CP2102 Cost: $15 US Schematic: https://cdn.sparkfun.com/datasheets/Wireless/WiFi/ESP8266-Thing-Dev-v10.pdf | |
WeMos D1 Mini | https://wiki.wemos.cc/products:d1:d1_mini PROS: Shields available, ADC has voltage divider to support 3.3v input. Serial Driver: CH34x Cost: $3.25 US Schematic: https://wiki.wemos.cc/_media/products:d1:sch_d1_mini_v3.0.0.pdf | |
Node MCU Lolin | https://frightanic.com/iot/comparison-of-esp8266-nodemcu-development-boards/ PROS: Exposes extra pins. Serial Driver: Cost: $3.30 US Schematic: ?? |
...