...

Issue the following commands:

module 54
backlog so97 1
 ; tuyamcu 11,1
 ; tuyamcu 12,9
 ; tuyamcu 21,10
backlog ledtable 0
 ; dimmerrange 10100,1000
 ; so59 1
 ; so68 0

Add the following rule, this should be all on ONE line. 

This rule will not turn the fan on when the fan speed is changed.

Rule1 on TuyaReceived#Data=55AA03070005030400010016 do publish2 stat/%topic%/speed 3,0 endon
      on TuyaReceived#Data=55AA03070005030400010117 do publish2 stat/%topic%/speed 3,1 endon
      on TuyaReceived#Data=55AA03070005030400010218 do publish2 stat/%topic%/speed 3,2 endon
      on TuyaReceived#Data=55AA03070005030400010319 do publish2 stat/%topic%/speed 3,3 endon

...

Rule2 on TuyaReceived#Data=5AA030700080A020004000000 do publish2 stat/%topic%/bb 1,1 endon
Rule2 1

Issues

Flickering Light

I think this issue is a result of the triac not having proper adhesion to the heat sink. The triac is simply pushed up against the heatsink. It has a foam pad that allows heat transfer from the triac to the heatsink.

Image Added

Could we do something better here?

Triac - BTA316-600ET

https://www.digikey.ca/en/products/detail/ween-semiconductors/BTA316-600ET-127/2530340

Datasheet:

https://www.ween-semi.com/sites/default/files/2018-10/bta316-600et.pdf

References