Versions Compared


  • This line was added.
  • This line was removed.
  • Formatting was changed.


I am in the process of doing this now. If you go onto YouTube and type in scamp rivetless you will find some information on it.
What I did was I removed all the cabinets, but before I removed them I marked the places where I would like the blocks to go. I pulled back the ensolite and cleaned the area and glued the blocks in place (this is the step I am on now), once that is done I will be covering them with resein and cloth to make the fibreglass, once that is done I will glue the ensolite back in place and I will be done. I did dry fit the cabinets as I had one block in the wrong place.
I used 3/4 plywood cut in strips, for the rounded sections I traced the curves out on the plywood and it seemed to work.

Image AddedImage Added

Image Added