...
| Setting | Value |
|---|---|
| Z-Adjust | -1.250 |
Enclosure
https://www.printables.com/model/17-original-prusa-i3-mk3-enclosure-ikea-lack-table-pr
Non-Printed Parts
- 3x Ikea Lack table
- LED Lights and switch
- Wire
- Plexiglass
- 3pcs: 440 x 440 mm, thickness 3mm. (17.3" x 17.3") ~ 1/8" thick
- 2pcs: 220 x 440 mm, thickness 3mm (17.3" x 8.7")
Printed Parts
| Part | URL |
|---|---|
| Door Pulls with round 10mm diameter x 3mm depth | |
| PSU Mount | https://www.thingiverse.com/thing:3512467/files |
| PSU replacing Frame brace for Original Prusa i3 MK3 | https://www.thingiverse.com/thing:2859884/files |
Lack adjustable feet | https://www.printables.com/model/164528-lack-feet-adjustable-height |
| Prusa I3 Mk3 Heatbed Cable Cover Soldered | https://www.printables.com/model/1983-prusa-i3-mk3-heatbed-cable-cover-soldered |
| Additional lack table bracket | https://www.printables.com/model/46769-additional-lack-table-bracket |
OctoPrint/OctoPi
I added a raspberry pi and installed octopi.
...
Installed plugins:
- Firmware Updater(1.13.3)
- Obico
Obico
Steve's Notes
Accessories
99% isopropyl, lint free towels and filament is all you need
...
I'd stick with prusaslicer. Cura is ok, but never really necessary exceot except for very specific edge cases.
I was using fusion 360, but you can only use it for free for 1 year
So using blender, and free cad
...