...
Issue the following commands:
Code Block |
---|
module 54 backlog so97 1 ; tuyamcu 11,1 ; tuyamcu 12,9 ; tuyamcu 21,10 backlog ledtable 0 ; dimmerrange 10,1000 ; so59 1 ; so68 0 |
Add the following rule, this should be all on ONE line.
This rule will not turn the fan on when the fan speed is changed.
Code Block |
---|
Rule1 on TuyaReceived#Data=55AA03070005030400010016 do publish2 stat/%topic%/speed 3,0 endon on TuyaReceived#Data=55AA03070005030400010117 do publish2 stat/%topic%/speed 3,1 endon on TuyaReceived#Data=55AA03070005030400010218 do publish2 stat/%topic%/speed 3,2 endon on TuyaReceived#Data=55AA03070005030400010319 do publish2 stat/%topic%/speed 3,3 endon |
...
Code Block |
---|
Rule2 on TuyaReceived#Data=5AA030700080A020004000000 do publish2 stat/%topic%/bb 1,1 endon Rule2 1 |
Issues
Flickering Light
I think this issue is a result of the mosfet not having proper adhesion to the heat sink. The mosfet is simply pushed up against the heatsink. It has a foam pad that allows heat transfer from the mosfet to the heatsink.
Could we do something better here?
References
Reference | URL |
---|---|
The Tasmota Fan Controller I've been waiting for... | https://www.digiblur.com/2020/07/the-tasmota-fan-controller-ive-been.html |
Blakadder's DS03 | https://templates.blakadder.com/treatlife_DS03.html |
Combo Speed Fan Controller/Dimmer with Tasmota - How to Flash Shelly devices with NO wires! | https://www.youtube.com/watch?v=o813Kjw76_I |
Tasmotizer | https://github.com/tasmota/tasmotizer |