You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 22 Next »

Overview

Model: Back-UPS ES 750

Battery Details

SpecificationDetail
Image

PartAJC-D7S
Voltage12v
Capacity7Ah
Type

Sealed Lead Acid (AGM)

TerminalsF2
Length5.94 in / 150.9 mm
Width2.56 in / 65 mm
Height3.7 in / 94 mm
Weight4.5 lbs


Lithium Iron Phosphate Battery Replacement


I ordered this LiFePO4 battery off amazon which is the exact same size as the original.

Cost: $63 CA plus Taxes.


NASTIMA 12V 8Ah Rechargeable Lithium Iron Phosphate Battery,Built-in BMS, 4000+ Cycles LiFePO4 Battery Pack

https://www.amazon.ca/dp/B0B5WBHDDN?smid=A32QMQUDJWY3FO&ref_=chk_typ_imgToDp&th=1


Tested this battery's capacity pulling 2A. Capacity came up as 8.8Ah.

Note: Battery voltage stays at 0v once discharged until voltage is applied. Does not bounce back on it's own.


I performed a capacity test on the old lead acid battery. The battery had a 3 Ah capacity when drained to 10.5v at 2A.


Testing the Battery Under Load

I ended up having some quick shutdowns after replacing the battery.  

On this UPS I have the following items connected:

ItemPower Consumption
QNAP TS251 Network Attached Storage~100W (spec: 18.09 W)
HP Compaq Elite 8300 SFF~200W
Dell PowerEdge T150~300W
Raspberry Pi 1~5-10W
Asus RT-AC56U Router~10W
Smart/RG DSL Modem~10W
Asus Hub~10W

Total Power

640W (~ 5A@120V)

Battery Amperage

50A@12V


Ok, so battery has a 10A max output, which is 1A at 120V.


Lets figure out what are real power usage is....


ItemPower Consumption
QNAP TS251 Network Attached Storage
HP Compaq Elite 8300 SFF
Dell PowerEdge T150
Raspberry Pi 1
Asus RT-AC56U Router
Smart/RG DSL Modem
Asus Hub

Total Power






References

ReferenceURL
Manual
Specifications
DIY Replacement Battery 12V 18650 Li-ion For APC Back-UPS 650https://www.yousun.org/archives/101
Replace batteryhttps://www.youtube.com/watch?v=_dydlRHFjrc
Detailshttps://www.yousun.org/archives/660



  • No labels