Skip to end of metadata
Go to start of metadata



Siding Materials

Siding

DetailAmountAdditional Information



https://www.maibec.com/imports/medias/pdf/en/siding/maibec-technical-sheet-modern.pdf

Installation System: Maibec em+®

Finish: Textured

Actual Dimensions: 5/8” x 5 1/4"

Exposed Surface: 4 9/16"

Overlap: 11/16"


Color: Coastal Charcoal 058

Touch Up Paint

Coastal Charcoal 058

Touch up paint

Starter Strips
Trim

Modern Casing

(Can probably just use trim)


Stapler Guide

Stained maibec nails

Staples

Features

  • Pneumatic Fasteners
  • Used for em+ and URBAHN
  • 2" Stainless Steel
  • 7/16"  crown
  • 16 gauge



Other Material Needed

MaterialAmountDescription
Strapping
Strapping at 16" center
Drip Edge
Drip edge attached to behind strapping
Flashing around Garage Door

Caulking

LePage® Colour Code: 296
QUAD MAX IDH#:2054592


>> QUAD MAX Window, Door & Siding Flexible Sealant - #296 Espresso, 280 ml



I used:

LePage® Colour Code: 551 - Gris Metallique
QUAD MAX IDH#:1869876


Colors: Maibec.pdf

Job Details

Square Footage

Kitchen Wall

  • 14' x 12' = 168 sq feet
  • Total Trim = 14' + 14' + 12' = 40'
  • = 14'*12/16 + 3 x 12' = 162'

Back Wall

  • 32' x 10.5' - 84 sq' (doors) = 336 - 84 = 252 sq'


  • window 52x42.  total trim = 188" = 16'
  • back door 81x75. total trim = 225" = 19'
  • garage door 81x75. total trim = 225" = 19'
  • edge pieces = 32' (top) + 22' edges = 54'
  • Total trim: 108'


  • = 32'*12/16 + 3 x 12' = 324'

Garage Wall

  • Siding
  • = 20' x 13' = 260 sq'


  • Trim
  • = 13' + 13' + 20' = 46'


  • = 20'x12/16 +2  *13 = 221' 

Garage Front

  • 11' x 13' - 64 sq' (door) = 143 - 64 = 70 sq'


  • Trim
  • = Garage Door 8'  + 8' + 8' = 24'
  • + Edging= 13' + 13' + 11' = 37'
  • = 61'


  •  = (4' * 12/16 +2 )'*13' + 9' x 5' * 12/16
  • = 65 + 34
  • = 99'


Total:

Siding

  • = 168 + 252 + 260 + 70
  • = 750 sq' + 10% = 850'

Trim

  • = 40 + 108 + 46 + 61
  • = 255' + 10% = 280'


Furring Strips

  • = 162 + 324 + 221 + 99
  • = 806 + 10% 
  • = 886' /8'
  • =110


Ventilated Starter Strips

  • 14'+32'+20'+3'
  • = 69' + 10% = 76'



Flashing



Deck Flashing



Concrete Basement Flashing





Above Window


Windo/Door Flashing


Below Window


Top of Wall

  • No flashing required




Window Casing arrangement

  • Siding up against window


Installation

  • Install 1x3 kiln dried furring strips on the studs

  • Install weather sealing around all windows and doors

  • Install Metal flashing above windows and where water drainage is needed.

  • Install at least 8" above the ground

  • Use metallic starter strip to ensure proper ventilation and prevent rodent and insect infestation 

  • If you need to cut a board at 90 degrees, then you will need to apply touch up paint to the cut end

  • If you have to make a joint cut, make a 45 degree cut at both ends and apply touch up paint.
  • Attach at the furring strip.

  • Use recommended staples and nails only and use the maibec stapler guide if possible.

  • Used stained maibec nails where tongue and groove system removed.

  • A common way to finish the wall is to add a molding and butt up the siding to it leaving a 1/2" spacing between the molding and the soffit.

  • Caulking



References

ReferenceURL
How to Flash a Window | This Old Househttps://www.youtube.com/watch?v=DGmLFvZ7Jg0
Flashing around windowhttps://www.youtube.com/watch?v=ycdgjUZf0H0

Maibec em+ siding installation video

https://www.youtube.com/watch?v=0IFWRDk0_HA
Maibec Installlation Guide
*Correctly Flashing and Caulking an Exterior Doorhttps://www.youtube.com/watch?v=naJwQRVlFsM



  • No labels