...
Connect RX -> TX | 3.3 -> 3.3 | TX -> RX | GND -> GND and connect TP16 to GND (as used in the TTL).
Press and hold the button while connecting to power.
This is an ESP 8285 in the iFan2.
To flash:
git clone https://github.com/arendst/Tasmota.git
cd Tasmota/lib/
vi deployLibs.sh
| Code Block |
|---|
#!/bin/sh
rm -rf ~/Documents/Arduino/libraries/*
cp -R ./default/* ~/Documents/Arduino/libraries/.
cp -R ./lib_audio/* ~/Documents/Arduino/libraries/.
cp -R ./lib_basic/* ~/Documents/Arduino/libraries/.
cp -R ./lib_display/* ~/Documents/Arduino/libraries/.
cp -R ./lib_div/* ~/Documents/Arduino/libraries/.
cp -R ./lib_i2c/* ~/Documents/Arduino/libraries/.
cp -R ./lib_rf/* ~/Documents/Arduino/libraries/.
cp -R ./lib_ssl/* ~/Documents/Arduino/libraries/.
cp -R ./lib_ssl/* ~/Documents/Arduino/libraries/. |
chmod +x deployLibs.sh
./deployLibs.sh
Open Arduino IDE
Open tasmota project
Set board to ESP8285 and other settings, see below:
With the iFan in flash mode, click Upload.
References
| Reference | URL |
|---|---|
| Flashing Tasmota | https://tasmota.github.io/docs/devices/Sonoff-iFan02/ |
...