Versions Compared

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

Image Added


Table of Contents

Specifications

SpecificationValue
Shape

Oval

Length24'
Width12'
Shallow End3.5'
Deep End6.5'
Volume9220 US gal / 34,900 L


Configuration 

Image Added


Equipment


EquipmentSeriesMakeModelSN#Details
HeaterJandy Pro SeriesJandy JXi Gas-Fired Pool and Spa Heater260NLT EC02 0501 1919 0071https://www.jandy.com/-/media/zodiac/global/downloads/h/


Installation Code HandbookQuick Reference Guide:

http://www.tagengineering.ca/wp-content/uploads/2015/02/B149-1handbook.h0454800.pdf


Seems to heat pool at 2-3 ºF/Hour

Chlorine GeneratorJandy Pro SeriesJandy TrueClear

https://www.jandy.com/-/media/zodiac/global/downloads/h/h0613500.pdf
PumpJandy Pro SeriesFloproFHPM.75CNDD16JA 2203
Filter

Jandy Pro Series

CV Series Filters

CV340

Cartridge filter

340 sqft filter capacity

Manual: H0291800.PDF


Parts

Pump

https://www.poolsuppliescanada.ca/jandy-flopro-fhpm-pump-parts

Image Added


PartDetails
10

Jandy R0446000 - Drain Plug

https://www.poolsuppliescanada.ca/jandy-r0446000-drain-plug.html

17Jandy R0337601 - O-Ring (Tailpiece)


Heater

https://www.poolsuppliescanada.ca/jandy-jxi-pool-heater-parts

Image Added

Image Added



Filter

https://www.poolsuppliescanada.ca/jandy-cv-series-cartridge-filter-parts

Image Added

PartDetails
23 O-rings 
R0358000 O-Ring Replacement Kit for Zodiac Jandy DE DEL DEV CL CV Series Cartridge Pool Filter, Compatible with Models CV340 CV460 CV580 CL340 CL460 CL580 DEV48 DEV60 DEL48 DEL60

Image Added

https://www.amazon.ca/R0358000-Replacement-Zodiac-Cartridge-Compatible/dp/B09SH2PVRD/ref=sr_1_9?keywords=jandy+filter+o+ring&qid=1684335866&sprefix=jandy+filter+o-%2Caps%2C111&sr=8-9

https://www.poolsuppliescanada.ca/zodiac-r0358000-o-ring-replacement-kit.html


Automation/Timers

Pump Timer

Image AddedImage Added

Controlled by Sonoff Admin UI:  http://192.168.1.165

TimePump
8:00 AMON
10:00 AMOFF
10:00 PMON
3:00 AMOFF

Total Time: 7h/day

Heater 

Controlled via HomeKit. See Pool Heater Controller

http://192.168.1.164/

Image Added

TimeHeater
10:05 PMON - 84F
9:00 AMOFF 

...

  • remove plugs from returns and skimmer
  • install return coversdiverters and aim downward towards each other. 


  • run water into pump to fill up intake line.
  • turn pump on




Closing the Pool

Buy

  • Winterizing Chemicals
  • Gizzmo
  • Antifreeze
  • Cell cleaner

...

Continue to circulate water for 24 hours after adding chemicals.

Tasks

  • Turn off pool timers - pool.jmehan.com
  • Set heater to off.
  • Turn power off.
  • Drop water level below returns by about an inch or so using sump pump (about 5 hours).
  • Remove return jets

...

  • Depressurize system by releasing air from top of filter.
  • Remove pump drain plug and disconnect pump.
  • Drain cartridge filter and remove pleated filters.
  • Force air though filter output through heater.
  • Remove drain plug from heater.
  • Disconnect and remove Remove salt cell and install winter cap.


  • Force air through returns lines  using a shop vac. Plug one return using plugs to force water out other line and then repeat with the other line.
  • Force air through intake(skimmer) line and attach "gizmo". Vacuum skimmer if needed.

...

  • Add antifreeze to return lines and plug.
  • Add antifreeze to skimmer and intake line.


  • Open top of heater and turn gas off
  • Turn off gas using external shutoff


  • Clean filters.
  • Store pump, salt cell inside. Store filters inside garage attic.


  • Install Cover


Water Chemistry

Important

Info
titleAlways
  • Turn off cell for 24 hours after adding salt
  • Wait 48 hours after shock before getting sample for water test


Chemicals


Water Report - 2019

ReadingValueStatusDesired StateCalculated Chemicals NeededWhat I addedResult (Next Morning)
Salt0Low3200 ppm267 lb Salt

267 lb (120kg) x 0.8

= 213 lb (97kg)

Added 100 kg

-
Chlorine0Low

Shock (Swim Resolve ~ 600g)4 Ideal → OK
Alkalinity50Low120 ppm7 lbs of sodium bicarbonate7 x 0.8 = 5.6 lb100 OK
Ph7.2OK
-
7.8 OK
Hardness100Low400 ppm24 lbs of calcium chloride7kg / 17.6 lbs350 OK

...

Added 400ml PhosRemove (instead of Clarita Ultra 2:1)

Added 1.5 kg Calcium


Water Report - 2023


Test Strip Results (June 1st)

ReadingValueValue (pool master)StatusDesired StateCalculated Chemicals NeededWhat I AddedResult (Next Morning)
Hardness100250Low400 ppm24 lbs of calcium chloride*Added 8 lbs
Chlorine01 ok


-
Alkalinity4060Low120 ppm

7 lbs of sodium bicarbonate

-
Ph6.56.5Low7.218 ounces of soda ash (sodium carbonate)-


Water Test Report (June 13th)

Image Added


ReadingValueStatusDesired StateCalculated Chemicals NeededWhat I AddedResult (Next Morning)
Hardness252Ideal200-300--
Chlorine2.56

--
Alkalinity78Low80-120 

 1kg of Alka+

1kg Alka+
Ph7.8High7.4-7.6210 g PH-210g PH-
Stabilizer3Low30-60600g Stabilizer3 stab ultra pucks to skimmer
Salt2349Low300022 kg Salt (1 bag = 20kg)20kg - 1 bag salt


Image Added



Chemicals

Info
titleAlways
  • Turn off cell for 24 hours after adding salt
  • Wait 48 hours after shock before getting sample for water test


Image AddedImage Added


Chemical

Active IngredientUsed For
Calcium+calcium chlorideIncrease Hardness
PH-sodium bisulfateDecrease PH
PH+sodium carbonateIncrease PH
Alka +sodium bicarbonateIncrease Alkalinity
Stabilizercyanuric acidStabilizes Chlorine
Stab Ultra (pucks)cyanuric acid

Stabilizer 

Each puck is 200g

Clarita Ultra
Water Clarifier
Shock


BluePrint

https://blueprintpool.com/application/files/6315/6457/7377/BLUEPRINT_Catalogue_2019.pdf

...

YearFirst in the PoolFirst UnderwaterLongest Swim
2019June 10 (60F): John → Katie → Xander → JennyJune 10(60C): XanderJune 10 (60C): Xander (15-20mins)
2020May 3 (47F): Katie → JennyKatie, Jenny

Yard Layout

Image Removed

Fence Design

Image Removed

Deck Design


2023May 31st (80F): JohnJohnJohn


Safety Cover

Image Added


Anchors

Image Added

We will strengthen these brass anchors. We start with a 2" piece of metal, drill some holes and thread them for a #6-32 screw. 


Image AddedImage AddedImage Added


Again using a 3/4" washer:

Image AddedImage AddedImage AddedImage Removed



Pictures


Suppliers

...