Versions Compared

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

Image RemovedImage Added


Table of Contents

...

SpecificationValue
Shape

Oval

Length24'
Width12'
Shallow End3.5'
Deep End6.5'
Volume9220 US gal / 34,900 L


Configuration 

Image Added


Equipment


EquipmentSeriesMakeModelSN#Details
HeaterJandy Pro SeriesJandy JXi Gas-Fired Pool and Spa Heater260NLT EC02 0501 1919 0071https://www.jandy.com/-/media/zodiac/global/downloads/h/

Installation Code Handbook:


Quick Reference Guide:

h0454800http://www.tagengineering.ca/wp-content/uploads/2015/02/B149-1handbook.pdf


Seems to heat pool at 2-3 ºF/Hour

Chlorine GeneratorJandy Pro SeriesJandy TrueClear

https://www.jandy.com/-/media/zodiac/global/downloads/h/h0613500.pdf
PumpJandy Pro SeriesFloproFHPM.75CNDD16JA 2203
Filter

Jandy Pro Series

CV Series Filters

CV340

Cartridge filter

340 sqft filter capacity

Manual: H0291800.PDF


Parts

Plumbing Parts

...

O-Rings for Couplers

Inside Diameter: 66mm ~2.6" (2 19/32" )

Outside Diameter: 72.6mm ~2 7/8"

Width/Thickness: 3.4mm ~ 0.13" (17/128" ~ 1/8")

Part: 

????      R0446400 JANDY | UNION O-RING, SET OF 2

Pump

https://www.poolsuppliescanada.ca/jandy-flopro-fhpm-pump-parts

Image Modified


PartDetails
10

Jandy R0446000 - Drain Plug

https://www.poolsuppliescanada.ca/jandy-r0446000-drain-plug.html

17Jandy R0337601 - O-Ring (Tailpiece)

...

https://www.poolsuppliescanada.ca/jandy-jxi-pool-heater-parts

Image Removed

Image Added

Image Added



Filter

https://www.poolsuppliescanada.ca/jandy-cv-series-cartridge-filter-parts

...

PartDetails
23 O-rings 
R0358000 O-Ring Replacement Kit for Zodiac Janay Jandy DE DEL DEV CL CV Series Cartridge Pool Filter, Compatible with Models CV340 CV460 CV580 CL340 CL460 CL580 DEV48 DEV60 DEL48 DEL60

https://www.amazon.ca/R0358000-Replacement-Zodiac-Cartridge-Compatible/dp/B09SH2PVRD/ref=sr_1_9?keywords=jandy+filter+o+ring&qid=1684335866&sprefix=jandy+filter+o-%2Caps%2C111&sr=8-9

https://www.poolsuppliescanada.ca/zodiac-r0358000-o-ring-replacement-kit.html


Automation/Timers

Pump Timer

Image AddedImage Added

Controlled by Sonoff Admin UI:  http://192.168.1.165

...

Heater 

Controlled via HomeKit. See Pool Heater Controller

http://192.168.1.164/

Image Added

TimeHeater
10:05 PMON - 84F
9:00 AMOFF 

...

  • remove plugs from returns and skimmer
  • install return coversdiverters and aim downward towards each other. 


  • run water into pump to fill up intake line.
  • turn pump on




Closing the Pool

Buy

  • Winterizing Chemicals
  • Gizzmo
  • Antifreeze
  • Cell cleaner

...

  • Depressurize system by releasing air from top of filter.
  • Remove pump drain plug and disconnect pump.
  • Drain cartridge filter and remove pleated filters.
  • Force air though filter output through heater.
  • Remove drain plug from heater.
  • Disconnect and remove Remove salt cell and install winter cap.


  • Force air through returns lines  using a shop vac. Plug one return using plugs to force water out other line and then repeat with the other line.
  • Force air through intake(skimmer) line and attach "gizmo". Vacuum skimmer if needed.

...

  • Add antifreeze to return lines and plug.
  • Add antifreeze to skimmer and intake line.


  • Open top of heater and turn gas off
  • Turn off gas using external shutoff


  • Clean filters.
  • Store pump, salt cell inside. Store filters inside garage attic.


  • Install Cover


Water Chemistry

Important

Info
titleAlways
  • Turn off cell for 24 hours after adding salt
  • Wait 48 hours after shock before getting sample for water test


Chemicals


Water Report - 2019

ReadingValueStatusDesired StateCalculated Chemicals NeededWhat I addedResult (Next Morning)
Salt0Low3200 ppm267 lb Salt

267 lb (120kg) x 0.8

= 213 lb (97kg)

Added 100 kg

-
Chlorine0Low

Shock (Swim Resolve ~ 600g)4 Ideal → OK
Alkalinity50Low120 ppm7 lbs of sodium bicarbonate7 x 0.8 = 5.6 lb100 OK
Ph7.2OK
-
7.8 OK
Hardness100Low400 ppm24 lbs of calcium chloride7kg / 17.6 lbs350 OK

...

Added 400ml PhosRemove (instead of Clarita Ultra 2:1)

Added 1.5 kg Calcium


Water Report - 2023


Test Strip Results (June 1st)

ReadingValueValue (pool master)StatusDesired StateCalculated Chemicals NeededWhat I AddedResult (Next Morning)
Hardness100250Low400 ppm24 lbs of calcium chloride*Added 8 lbs
Chlorine01 ok


-
Alkalinity4060Low120 ppm

7 lbs of sodium bicarbonate

-
Ph6.56.5Low7.218 ounces of soda ash (sodium carbonate)-


Water Test Report (June 13th)

Image Added


ReadingValueStatusDesired StateCalculated Chemicals NeededWhat I AddedResult (Next Morning)
Hardness252Ideal200-300--
Chlorine2.56

--
Alkalinity78Low80-120 

 1kg of Alka+

1kg Alka+
Ph7.8High7.4-7.6210 g PH-210g PH-
Stabilizer3Low30-60600g Stabilizer3 stab ultra pucks to skimmer
Salt2349Low300022 kg Salt (1 bag = 20kg)20kg - 1 bag salt


Image Added



Chemicals

Info
titleAlways
  • Turn off cell for 24 hours after adding salt
  • Wait 48 hours after shock before getting sample for water test


Image AddedImage Added


Chemical

Active IngredientUsed For
Calcium+calcium chlorideIncrease Hardness
PH-sodium bisulfateDecrease PH
PH+sodium carbonateIncrease PH
Alka +sodium bicarbonateIncrease Alkalinity
Stabilizercyanuric acidStabilizes Chlorine
Stab Ultra (pucks)cyanuric acid

Stabilizer 

Each puck is 200g

Clarita Ultra
Water Clarifier
Shock


BluePrint

https://blueprintpool.com/application/files/6315/6457/7377/BLUEPRINT_Catalogue_2019.pdf

...

YearFirst in the PoolFirst UnderwaterLongest Swim
2019June 10 (60F): John → Katie → Xander → JennyJune 10(60C): XanderJune 10 (60C): Xander (15-20mins)
2020May 3 (47F): Katie → JennyKatie, Jenny

Yard Layout

Image Removed

Fence Design

Image Removed

Deck Design

Image Removed

Pictures

Image RemovedImage RemovedImage RemovedImage RemovedImage Removed

Permit

View file
nameScan05-21-2019-221814.pdf
height250
Image Removed
View file
nameFindlay Cres 19 BP1902990 Insp 20221121 Pool.pdf
height250

Parts

...

O-Ring for Couplers

Inside Diameter: 66mm ~2.6" (2 19/32" )

Outside Diameter: 72.6mm ~2 7/8"


2023May 31st (80F): JohnJohnJohn


Safety Cover

Image Added


Anchors

Image Added

We will strengthen these brass anchors. We start with a 2" piece of metal, drill some holes and thread them for a #6-32 screw. 


Image AddedImage AddedImage Added


Again using a 3/4" washer:

Image AddedImage AddedImage Added



Pictures

Image AddedImage AddedImage AddedImage AddedImage Added

...


Suppliers

SupplierURL
Pool Supplies Canadahttps://www.poolsuppliescanada.ca/
Pool Store Canadahttps://www.poolstorecanada.ca/

...