...
Scope or measure the LPC-CN1(10-pin connector, next to 4-pin COM1 connector), pin 1 (LPC CLK, normal ~1.7V)
If the voltage is ~2.4V, solder 100 Ohm between pin 1 (LPC CLK) and ground (pin 8 or 10).
If the voltage is <1V, solder 100 Ohm to a 3.3V pin(since this does not apply to me, someone would have to spend time to find/test it).
Our issue:
Solder 100 ohm resister between CLK and GND on connector LPC-CN1.
References
| Reference | URL |
|---|---|
| Hardware Spec |
...