...
The dimmer will reboot and connect to your wifi network. Check your router to find out it's IP address and connect to it via your browser.
Set the GPIOs
3 Way Setup
...
From the
...
Configuration → Configure Other screen, input the template and friendly name:
...
Template:
...
{"NAME":"Treatlife 3-Way","GPIO":[0,0,0,0,21,158,0,0,22,18,9,0,0],"FLAG":0,"BASE":18}
You should end up with a configuration that looks like:
backlog module 18;gpio4 21;gpio5 158;gpio12 22;gpio13 18;gpio14 9;
Should result in the following:
2 Way Setup
> backlog module 18;gpio4 52;gpio5 0;gpio12 29;gpio13 17;gpio14 0;switchmode 1
...