Versions Compared

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

...

  • Clean filters.
  • Store pump, salt cell inside. Store filters inside garage attic.


Water Chemistry

Always

  • Turn off cell for 24 hours after adding salt
  • Wait 48 hours after shock before getting sample for water test


Initial Setup - First Fill - 2019


ReadingValueStatusDesired StateCalculated Chemicals NeededWhat I addedResult (Next Morning)
Salt0Low3200 ppm267 lb Salt

267 lb (120kg) x 0.8

= 213 lb (97kg)

Added 100 kg

-
Chlorine0Low

Shock (Swim Resolve ~ 600g)4 Ideal → OK
Alkalinity50Low120 ppm7 lbs of sodium bicarbonate7 x 0.8 = 5.6 lb100 OK
Ph7.2OK
-
7.8 OK
Hardness100Low400 ppm24 lbs of calcium chloride7kg / 17.6 lbs350 OK

...

  • Ensure that you have already filled your pool with water and the pump is running
  • Add the stain and scale product to the pool to allow the pump to circulate the water for approximately 30 minutes
  • Broadcast across the surface of the pool, the oxidizer and allow for the pump to circulate for approximately 60 minutes
  • Add the bottle of algaecide by walking around the edge of the pool and allow for chemicals to continue to circulate overnight
  • The following day, test the pH and ensure that it is between 7.2 – 7.6
  • Start chlorinating your pool



Levels at Pool Opening - 2021

ReadingValueValue (wc)StatusDesired StateCalculated Chemicals NeededWhat I addedResult (Next Morning)
Salt
2350
3200 ppm

x lb Salt

wc: 22.7kg

-

-
Chlorine00.5




Alkalinity100 ok66.81
120 ppm

0 lbs of sodium bicarbonate

wc: 4.3kg

3.0kg (need 1.3kg)
Ph6.8 (low)7.4

-

Hardness100 (low)156
400 ppm

calc: 24 lbs/11kg of calcium chloride

wc: 3.5kg

3.5kg
Phosphates
2000

phos remove

wc: 1.4L

600ml (need 800ml)
TDS3050





Stabilizer29





Taylor Drops3





Copper0.6





Iron0.2










swim now

wc: 1 bag

1 bag





stain and scale

wc: 435ml

450ml

...