...
I can't remember what direction the fan was previously, but I set it up so that it blows air away from the motor and out the vents at the top of the fridge.
Looks like I go this wrong, the blade should be blowing through the coil.
Another note on the airflow is I think it is more efficient to blow air through the coil than pull (induce) it through. this is because the air is slightly pressureised which will increase the temperature of the air slightly giving a greater temperature difference between refrigerant and air (on cooling mode). If it were heating like a heat pump it would be the opposite.
Fan Blade
Part#: WPW10445742 or 4390912
...