Specifications
| Specification | Details |
|---|---|
| Make | Maytag Bravos XL |
| Model | MVWB950YG0 |
Pictures
Repairs
Replacing the Bearings
The replacement of the bearings can be a complicated task but reviewing the following videos will help.
Parts
| Part | Description | Image |
|---|---|---|
| Bearing Kit | W10447783 Washer Tub Bearing Installation Tool & W10435302 Tub Seal and Bearing Kit Replacement for Maytag MVWB750YW0 Washing Machine - Compatible with W10447783 Tool Kit & W10435302 Bearing Kit
|
|
Steps
| Step | URL |
|---|---|
| Open Bravos Cover | Remove the top 2 screws at the back of the washer. Slide the top forward and lift. |
| Main Repair Video | Some difference. Model is slightly different. Agitator is different, see next step. |
| Removing Agitator Steps | |
| Removing the tub if stuck | I had to do this. Just keep jacking until it comes out. |
Pictures
LF (Long Fill) Error Code
LF flashes when the water level does not change for a period of time OR water is present but control does not detect the water level changing.
- Is water supply connected and turned on?
- Are hose screens plugged?
- Is water siphoning out of the drain hose? Check for proper drainhose installation.
- Is the pressure hose connection from the tub to the machine/motor control pinched, kinked, plugged, or leaking air?
| Part | Description | Picture | URL |
|---|---|---|---|
| W10853723 | Whirlpool Washer Water Inlet Valve |
|
Diagnostic Mode
To enter diagnostic mode:
- turn washer off
- pressing any button for three seconds, release three seconds (and repeat).
- If successful, all of the LEDs will illuminate and the time will read 8:8'8.
- Press the button again within 5 seconds to enter manual diagnostic mode.
If done successfully, a single beep occurs and the three-digit display shows the User Interface ID# (H 80, H 8 1, etc.) for 3 seconds, then displays 000 and the Add A Garment indicator LED flashes.
Manual Tests
To check FRESH valve select and press the following:
WHITES START/PAUSE (turns on Fresh valve, cycle indicator flashes) WASH TEMP (selecting hot = hot valve; warm = hot & cold valves; cold = cold valve) START/PAUSE (turns off Fresh valve, cycle indicator is steady on).
To check DETERGENT valve select or press the following:
SUPER WASH or HEAVY DUTY START/PAUSE (turns on Detergent valve, cycle indicator flashes) WASH TEMP (selecting hot = hot valve; warm = hot & cold valves; cold = cold valve) START/ PAUSE (turns off Detergent valve, cycle indicator is steady on).
To check FABRIC SOFTENER valve select or press the following:
NORMAL START/PAUSE (turns on Fabric Softener valve, cycle indicator flashes) WASH TEMP (selecting hot = hot valve; warm = hot & cold valves; cold = cold valve) START/PAUSE (turns off Fabric Softener valve, cycle indicator is steady on).
To check BLEACH valve select or press the following:
DELICATE/HANDWASH START/PAUSE (turns on Bleach valve, cycle indicator flashes) WASH TEMP (selecting hot = hot valve; warm = hot & cold valves; cold = cold valve) START/PAUSE (turns off Bleach valve, cycle indicator is steady on).
References
| Reference | URL |
|---|---|
| User Manual | |
Serice Manual | |
| Parts | https://www.reliableparts.ca/lookup/215461/1463423 |
| Drain Hose Installation | https://www.youtube.com/watch?v=BW-EwI5NLBM |
| Installation Guide | |
| *** Enter Diagnostic Mode | https://www.youtube.com/watch?v=v4vcQ8QNkXg&t=62s |
| Whirlpool Washer Repair - How to Replace the Valve (Whirlpool # W10853723) | https://www.youtube.com/watch?v=bM2bXqE9H6s&t=396s |
| Maytag Washer LF Low Flow Fault Diagnose & Repair | https://www.youtube.com/watch?v=N-iul4E3cTI&t=473s |