You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 7 Next »

Problem

The Sonos Move took on water. Now the top controls don't work. Amber light turns on briefly when placed on charging base. Owner says it works when using the app and on the charging base.


Teardown

https://www.reddit.com/r/sonos/comments/mvrie6/long_overdue_sonos_move_teardown_start/


Remove Battery - 2x M4-8mm screws

Expose Bottom Screws

Remove 4x T-15 10mm screws (corse thread)


More Disassembling

Probing



Test PointDescription
TP 424GND
TP 422GND
TP 428GND
TP 423BAT RED WIRE
TP 421BAT ORANGE WIRE
TP 427USB POWER PIN 7
TP 433BAT BLUE WIRE
TP 436USB BROWN WIRE
TP 437USB BROWN/WHITE WIRE
TP 445? - NOT CONNECTOR


PIN Connector

PinDescription
1TP 423 - BAT RED WIRE
2GND
3TP 421 - BAT ORANGE WIRE
4TP 433 - BAT BLUE WIRE
5
6
7TP 427 - USB POWER
8TP 436 - USB BROWN WIRE
9TP 437 - USB BROWN/WHITE WIRE
10GND

Reseting

Press and hold the power button on the back of your Move.

Do this for at least 5 seconds to power it off.

Press and hold the  Join button and place Move back on the charging base.

This initializes the reset process.

Continue holding the  Join button until the light on top flashes orange and white.

The reset process is now starting.


The reset process will complete when the light will flash green. After performing these steps try checking if you can turn on the Move speaker.

References



  • No labels