Assumptions
18650 Battery Assumptions
Specification | Value |
---|---|
Nominal Voltage | 3.7v |
Max Voltage | 4.2v |
Cutoff Voltage | 3.0v |
Capacity | 2500mAh |
Configuration Options
This section will look at the pros and cons of a 3S versus 4S configuration.
3S (9V-12.6V)
Specification | Value |
---|---|
Nominal Voltage (3 x 3.7v) | 11.1v |
Max Voltage (3 x 4.2v) | 12.6 |
Min Voltage (3 x 3.0v) | 9v |
Cells in Series for Voltage | 3 |
Pros:
- Can charge it from the car
- Works with most chargers (solar and car chargers)
Cons:
- Would not get full capacity when using with an inverter. The inverter would shut off at 10.5v.
4S (12V-16.8V)
Specification | Value |
---|---|
Nominal Voltage (4 x 3.7v) | 14.8v |
Max Voltage (4 x 4.2v) | 16.8v |
Min Voltage (4 x 3.0v) | 12.0v |
Cells in Series for Voltage | 4 |
Pros:
- Would be able to use the full capacity of the battery when converting to AC.
Cons:
- Would need to step down the voltage to 12v which may introduce some losses.
- Could not charge it off of the car
Configuration
Battery Spec 3S56P - (130 Ah)
Specification | Value |
---|---|
Nominal Voltage (3 x 3.7v) | 11.1v |
Max Voltage (3 x 4.2v) | 12.6 |
Min Voltage (3 x 3.0v) | 9v |
Cells in Series for Voltage | 3 |
Parallel Cells to Get Capacity 80Ah/2.0Ah | 56 |
Total Cells Required | 168 |
Specification | Details |
---|---|
Capacity | 112-128.8 Ah |
Cell Capacity | 2.0-2.3 Ah |
Cells | 3x56=168 cells |
The Plano 50 Cal Ammo Box can hold a total of 192 cells (about 150Ah).
Battery Management System
50A BMS
3Series 50A 11.1V/12V/12.6V BMS PCB Protection Board for 18650 Li-ion Battery Cell with Balance
Features |
---|
Continuous Discharge Current: 50A Momentary Discharge Current: 150A Charge Voltage: 12.6V Charge Current: 50A Overcharge Detection Voltage: 4.28±0.025V Overcharge Protection Delay: 0.5S Overcharge Cancel Voltage: 4.08±0.1V Balance Detection Voltage: 4.20±0.025V Balance Cancel Voltage: 4.20±0.05V Balance Current: 60±5mA Over-discharge Detection Voltage: 2.8±0.1V Over-discharge Detection Delay: 0.1S Over-discharge Cancel Voltage: 3.0±0.1V Overcurrent Detection Voltage: 150mV Overcurrent Detection Delay: 9mS Overcurrent Protection Current: 200±10A Protection Cancel Condition: Disconnect Load Short Circuit Protection Condition: Outside Load Short Circuit Short Circuit Detection Delay: 250uS Protection Cancel Condition: Disconnect Load Main Circuit Conduction Internal Resistance: ≤25mΩ Working Current: ≤30uA Sleeping Current(Battery Over-discharge): ≤10uA Operating Temperature:﹣30℃~﹢80℃ Size: 75×51.5×15mm/2.95×2.02×0.59" |
100A BMS
3Series 50A 11.1V/12V/12.6V BMS PCB Protection Board for 18650 Li-ion Battery Cell with Balance
Features |
---|
Features ---It can provide protection for 3 cells in series ---Balance Charging function ---heat sink ---10pcs high power & low resistance MOS Electrical Characteristic Battery system---NCM, LiMnO2, LCO Battery Links--- 3S Input Charging Voltage--- 12.6V Input Charging Current---10A(MAX) Output Discharging Current ---100A(MAX) Peak Discharging Current --- 150A Operating Temperature --- -30℃ ~ + 80℃ Humidity (No Water-Drop)--- normal RH Humidity (No Water-Drop) ---normal 0% RH Protection Parameters (for Individual Cell) Over-Charge Voltage Protection------------4.28V±25mV Over-Charge Protection Delay Time -------0.5S Over-Charge Voltage Protection Release ---4.08 V±50mV Balance charge detection voltage -----------4.20V±50mV Balance charge release voltage --------------4.20V±50mV Balance charge current------------------------42±5mA Over-Discharge Voltage Protection -------- 2.8 V±100mV Over-Discharge detection delay-------------0.1S Over-Discharge Voltage Protection Release -- 3.0V ±100mV Over-current detection voltage--------------150mV Over-current detection delay-----------------9mS Over-Current Protection---------------------200±10A Over-Current Protection Release -----------Removed the load Short circuit current protection -------------normal function Short circuit detection delay-----------------200µS Short circuit protection Release -------------Remove the load Current Consumption Normal Mode ≦20 µA UVP Mode ≦10 µA Main circuit conduction resistance-----------≦25 mΩ PCB dimension including heat dissipation plate---70*51.5*10mm |
Battery Hookup Modem Batteries
COMES OUT TO ONLY $70/KWH!
Only 56 cents per cell! For $4.50 you get a modem battery with 8 LG 2200mah LGDAS31865 cells! Get them while they last! Last time we listed these a company bought almost all of them.
We spot tested tens of thousands of these cells and they came out around full capacity overall. These are a great source of genuine LG 2200mah cells because the modem batteries are either never used at all or they were used as backup only with less than 3 cycles. Modem batteries only gets cycled hen a house loses power which is very rare in our region.
Brand: | LG |
Model: | LGDAS31865 (ICR18650S3) |
Capacity: | 2200mAh Rated |
Voltage: | 3.60V Nominal |
Charging: | 4.20V Maximum 1075mA Standard 2150mA Maximum |
Discharging: | 3.00V Cutoff 430mA Standard 3225mA Maximum |
Description: | Blue Cell Wrapper White Insulator Ring 18650 Form Factor |
Almost every pack we opened had the light blue lg cells, some had dark blue lg cells with the same specs. Either way they are all name brand cells, the best ones out there
Packaging
I bought Plano 50 Cal Ammo Box, Black
Interior dimensions: 11.25" x 5.5" x 7"
Build
Battery Capacities
https://docs.google.com/spreadsheets/d/1mlgodp0UQAi1QGu0aGxJdH-wnCkg5dZosCjmBs_kSDo/edit#gid=0
Rpackr Configuration:
Build Pictures
Revised Build Pictures
Added 100A BMS and additional wiring to support the load. Then added terminals and USB and 12V port.
References
Reference | URL |
---|---|
Buying Used Batteries | https://batteryhookup.com/ |
Battery Pack Calculator | http://repackr.com/ |