You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 7 Next »

Model: BPR650


Problem

"does not heat up"


Possible Solution


https://www.justanswer.com/small-appliance/nbzog-breville-fast-slow-pro-stopped-heating-power-works.html


The issue is most likely caused by faulty/damaged thermal cutoff/thermal fuse that needs replacing. This is the link where you can order the thermal cutoff https://www.ebay.com/itm/353145091937

The thermal fuse is located inside this line cable (red).

Watch this video on how to access the thermal fuse https://www.youtube.com/watch?v=zh7e140Q1EM. Before replacing, please check the continuity of the fuse. Use multimeter and set it to continuity or resistance checking. If the line is open, replace the fuse.

Parts


Disassembling the Bottom

Removing the bottom requires the removal of 2 Torx-10 screws. Once removed the bottom can be pried apart. Clips hold it in place.


Thermal Fuse

Testing the thermal fuse showed no continuity. A replacement will be required. Verified that the unit works if we bypass the fuse.


Fuse Specification

Amazon Link


TypeSEFUSE
ModelSF152E
Voltage250V
Amperage10A
Temp157C


Fix

We will replace the fuse with one we received from Amazon.


Soldering the thermal fuse

https://www.youtube.com/watch?v=qDc9i3p_1Xo


We will submerge the use in cold water while soldering to prevent the fuse from blowing.

Verify continuity after soldering... 


Re-assemble and done!


References

  • No labels