...
Does not work with this model since there is no relay
Resetting Meter
To reset the meter, move the arrow below LOP and click OK.
VAC9010H Meter
This model is similar to the SIN9020S meter but has a current transformer for measuring current. This model also has the ability to trigger a relay in the event of low voltage.
...
All connections to the meter are made from the current capacitor board.
Connection | Description | ||
---|---|---|---|
Bat | Power connection for meter Batter Monitoring Connection (10-90v) Connect to loadMeter will get power from this connection when jumper is set to J4. | ||
Relay +/- | Relay Connection | ||
Vext +/- | Voltage to be applied to relay to trigger itPower supply connection. When connecting a relay, this voltage will be used to trigger the relay. (10-60v) | ||
Jumper | J3 - Relay or Power Supply Connections J4 - No Relay or Power Supply Connections | Jumper | ?? |
With No Relay or
...
Power Supply Connections
Note: Jumper should be set to J4.
With Independent Meter Power
Note: Jumper should be set to J3.
With Relay
Note: Jumper should be set to J3.
References
Reference | URL |
---|---|
Manual for SIN9020S Meter | |
Manual for VAC9010H Meter |
...