Faucets

Cleaning the Inlet Screen

• Turn off the water.
• Disconnect the water line from the faucet.
• Remove and clean filter screen at connection.
• Open faucets to let water out of line.

• Flush water lines.
• Replace filter screen and re-assemble.

Cleaning the Cartridge

• Turn off the water
• Remove the handle using an Allen Wrench/Hex Key. For the faucet shown above, the hex nut is located under the small cover in the handle.
• Remove the cartridge
• Place a bowl over the top of the faucet and slowly turn on the water in order to flush out any debris in the line. Repeat for both hot and cold lines.
• Clean the cartridge by rinsing in water.
• Reassemble

References

.