Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 23 Next »



Siding Materials

Siding

DetailAmountAdditional Information



https://www.maibec.com/imports/medias/pdf/en/siding/maibec-technical-sheet-modern.pdf

Installation System: Maibec em+®

Finish: Textured

Actual Dimensions: 5/8” x 5 1/4"

Exposed Surface: 4 9/16"

Overlap: 11/16"


Color: Ocean Spray Silver 059

Touch Up Paint

Ocean Spray Silver 059

Touch up paint

Starter Strips
Trim

Modern Casing

(Can probably just use trim)


Stapler Guide

Stained maibec nails

Staples

Features

  • Pneumatic Fasteners
  • Used for em+ and URBAHN
  • 2" Stainless Steel
  • 7/16"  crown
  • 16 gauge



Other Material Needed

MaterialAmountDescription
Strapping
Strapping at 16" center
Drip Edge
Drip edge attached to behind strapping
Flashing around Garage Door

Job Details

Square Footage

Kitchen Wall

  • 14' x 12' = 168 sq feet
  • Total Trim = 14' + 14' + 12' = 40'
  • = 14'*12/16 + 3 x 12' = 162'

Back Wall

  • 32' x 10.5' - 84 sq' (doors) = 336 - 84 = 252 sq'


  • window 52x42.  total trim = 188" = 16'
  • back door 81x75. total trim = 225" = 19'
  • garage door 81x75. total trim = 225" = 19'
  • edge pieces = 32' (top) + 22' edges = 54'
  • Total trim: 108'


  • = 32'*12/16 + 3 x 12' = 324'

Garage Wall

  • Siding
  • = 20' x 13' = 260 sq'


  • Trim
  • = 13' + 13' + 20' = 46'


  • = 20'x12/16 +2  *13 = 221' 

Garage Front

  • 11' x 13' - 64 sq' (door) = 143 - 64 = 70 sq'


  • Trim
  • = Garage Door 8'  + 8' + 8' = 24'
  • + Edging= 13' + 13' + 11' = 37'
  • = 61'


  •  = (4' * 12/16 +2 )'*13' + 9' x 5' * 12/16
  • = 65 + 34
  • = 99'


Total:

Siding

  • = 168 + 252 + 260 + 70
  • = 750 sq' + 10% = 850'

Trim

  • = 40 + 108 + 46 + 61
  • = 255' + 10% = 280'


Furring Strips

  • = 162 + 324 + 221 + 99
  • = 806 + 10% 
  • = 886' /8'
  • =110


Ventilated Starter Strips

  • 14'+32'+20'+3'
  • = 69' + 10% = 76'



Flashing



Deck Flashing



Concrete Basement Flashing





Above Window


Windo/Door Flashing


Below Window


Top of Wall

  • No flashing required




Window Casing arrangement

  • Siding up against window


Installation

  • Install 1x3 kiln dried furring strips on the studs

  • Install weather sealing around all windows and doors

  • Install Metal flashing above windows and where water drainage is needed.

  • Install at least 8" above the ground

  • Use metallic starter strip to ensure proper ventilation and prevent rodent and insect infestation 

  • If you need to cut a board at 90 degrees, then you will need to apply touch up paint to the cut end

  • If you have to make a joint cut, make a 45 degree cut at both ends and apply touch up paint.
  • Attach at the furring strip.

  • Use recommended staples and nails only and use the maibec stapler guide if possible.

  • Used stained maibec nails where tongue and groove system removed.

  • A common way to finish the wall is to add a molding and butt up the siding to it leaving a 1/2" spacing between the molding and the soffit.

  • Caulking



References

ReferenceURL
How to Flash a Window | This Old Househttps://www.youtube.com/watch?v=DGmLFvZ7Jg0
Flashing around windowhttps://www.youtube.com/watch?v=ycdgjUZf0H0

Maibec em+ siding installation video

https://www.youtube.com/watch?v=0IFWRDk0_HA
Maibec Installlation Guide
*Correctly Flashing and Caulking an Exterior Doorhttps://www.youtube.com/watch?v=naJwQRVlFsM



  • No labels